SEW 590 Series

Products

  • Air Cooled Series
  • Water Cooled Series

The SEW 590 Series of Shakers are matched with the DSA 200K and DSA 240K Series of Power Amplifiers. The Power Amplifier of a Water Cooled System is made in two parts: Armature Power Supply which houses the DC Section, Control Section, and Power Module for the Armature Coil and Field Power Supply which houses the DC Section and Control Section for the Field Coils. A dedicated Water Cooling System which pumps distilled water through the Shaker as its primary path and uses cold water from a Chiller as its secondary path with heat exchangers to cool down the distilled water of the primary path is also provided. Everything is assembled in 19-inch industrial rack of 36-unit height.

Standard Features

  • Aluminium Alloy Casting based Armature Structure
  • Hydrostatic Linear Central Guidance Bearing
  • Rocker based Suspension
  • Trunnion mounted Shaker Body
  • IP-67 Non-Contact Inductive Sensors for:
  • Armature Position
  • Armature Under / Over Travel
  • Shaker Orientation
  • Pressure Sensor based Water Leakage Detection
  • DC + Pneumatic based Auto-Centring of Armature
  • Shaker Body Isolation using Air Bellows
  • System Base Isolation using Rubber Pads
  • 10.1” Coloured TFT Touch Screen based Interface
  • 32-bit Microcontroller based Control Unit
  • Digital Gain Control of 0.1% Resolution
  • Digital Sine Generation of 0.1Hz Resolution
  • Display of Armature Voltage & Current in True RMS
  • Scaled Armature Voltage & Current BNC Output
  • Display of Field Voltage & Current
  • Galvanic Isolation of Analog Input & Output
  • Sensing and Display of Shaker Orientation
  • Auto Start, Stop, & Interlocking of Horizontal Slip Table
  • Multiple User Configurable Interlocks
  • Built-in Diagnostic Tool

Optional Features

  • Thermal Barrier for High / Low Temperature Operation
  • PC based Power Amplifier Remote
  • Automatic Trunnion for Shaker Body Rotation
  • Explosion Proof for Lithium-Ion Battery Testing
  • Field Power Regulation for higher Velocity
  • Long Stroke for higher Displacement
  • Pneumatic based Auto-Centring of Shaker Body
  • Low Frequency Operation with Displacement Sensor

System Specifications

Series SEW 590 – DSA 200K SEW 590 – DSA 240K

System Performance
Armature Diameter
590 mm
590 mm
Sine Force (peak)
12000 kgf (117.7 kN)
16000 kgf (156.9 kN)
Random Force (rms)
12000 kgf (117.7 kN)
16000 kgf (156.9 kN)
Shock Force (peak)
24000 kgf (235.4 kN)
32000 kgf (313.8 kN)
Acceleration (Sine)
90 g
100 g
Acceleration (Random)
70 grms
70 grms
Acceleration (Shock)
180 g
200 g
Velocity (peak)
1.8 m/s | 2.7 m/s*
1.8 m/s | 2.7 m/s*
Displacement (pk-pk)
51 mm | 76 mm**
51 mm | 76 mm**
Axial Resonance
1700 Hz ±5%
1700 Hz ±5%
Useful Frequency Range***
DC to 2000 Hz
DC to 2000 Hz

Shaker Characteristics
Moving Element Mass
133 kg
160 kg
Internal Load Capability
2000 kg
2000 kg
Suspension Axial Stiffness
< 1 kg/mm
< 1 kg/mm
Suspension Cross-Axial Stiffness
2800 kg/mm
2800 kg/mm
Stray Magnetic Field****
< 1 mT (10 gauss)
< 1 mT (10 gauss)
Compressed Air*****
6 bar (87 psi)
6 bar (87 psi)
Shaker Body Mass
10500 kg
10500 kg

Amplifier Characteristics
Power Output
200 kVA
240 kVA
Total Harmonic Distortion******
Typically, 0.5%
Typically, 0.5%
Input Impedance
> 10 kΩ
> 10 kΩ
Input Sensitivity
1 VRMS to 80 VRMS
1 VRMS to 80 VRMS
Signal-to-Noise Ratio
> 80 dB
> 80 dB
Power Efficiency******
> 92%
> 92%

Armature Insert Pattern
Metric: 1 at Centre, 8 at 200 mm PCD, 8 at 400 mm PCD, 8 at 550 mm PCD

Inch: 1 at Centre, 8 at 8” PCD, 8 at 16” PCD, 8 at 21” PCD

Notes:

  • *Peak velocity with reduced field power for Shock.
  • **Long stroke option.
  • ***Low frequency operation below 5Hz may require body locking or seismic foundation.
  • ****150 mm above armature head.
  • *****Dry compressed air to be provided by customer at installation site.
  • ******Measured on pure resistive load.
x